Construction Materials Testing
QTE’s core service is construction observation of concrete, engineered fill, and asphalt paving. To ensure the quality you deserve, our field staff uses the latest generation of equipment to assist them in verifying compliance of your building materials. QTE maintains over twenty sets of IDOT approved concrete testing equipment, over twelve Humboldt nuclear densimeters, three self-contained mobile laboratories, as well as various COE approved density testing devices. All equipment is carefully maintained and properly calibrated. Our main laboratory is approved by AASHTO, CCRL, the State of Illinois, and the Army Corps of Engineers.
St. Louis Construction Material Testing
Quality Testing and Engineering, Inc.’s (QTE) construction material testing staff have the knowledge and experience to handle a wide variety of building projects including healthcare, transportation, commercial, municipal and government facilities. Overseen by Eric Marlinghaus P.E., Construction Services Manager, the QTE staff has the extensive experience in providing services in accordance with all applicable governmental and site-specific specifications and regulations throughout the St. Louis Metro East. Our engineers and technicians are certified by MoDOT, IDOT, International Code Council (ICC), and the American Concrete Institute (ACI). QTE is a self-certified USACE small disadvantaged business.
Serving Metro East, Southern Illinois & St. Louis, MO
Quality Testing and Engineering, Inc. provides environmental consulting services to our clients in the Metro East, Southern Illinois, and St. Louis, Missouri areas. Our team has the experience and qualifications to provide our clients with a thorough environmental assessment and a plan to deal with liabilities that may arise. QTE also handles Environmental Testing and Consulting and Geotechnical Exploration.
Projects of all types and sizes can have environmental concerns. If not properly evaluated and addressed, these concerns can become complicated regulatory issues and result in costly project delays. Our experienced firm of highly qualified and certified professionals will test your site and identify potential environmental concerns and liabilities.
Environmental liabilities can cause costly delays. Navigating the regulatory process is extremely difficult.
Once we have completed our environmental testing, we guide our clients through the regulatory process. Regulations at the state, federal, and local level can be extremely difficult to navigate. Our team has extensive experience across jurisdictions and the knowledge necessary to help you avoid regulatory entanglements and costly delays.
Typically, the initial phase of a project would involve an Environmental Site Assessment or ESA. This assessment checks your site for potential environmental problems. If a problem is identified, a Phase II ESA is performed to explore for the presence of subsurface contaminants.
Additional phases of work would include a subsurface contaminant exploration (more detailed than Phase II ESA) and a site characterization. The site characterization will determine the lateral and vertical extent of impact and the site-specific soil and groundwater properties. These phases of work will can include the following tasks:
- Soil Sampling
- Groundwater Sampling and Monitoring
- Geophysical Surveys
- Analytical Testing
- Waste Characterization
- Groundwater Modeling
- Soil Gas Sampling
Once site characterization is complete, QTE will work with the development plan to minimize cleanup work. For example, if an asphalt parking lot covers an area of contamination, the need for cleanup in that area is reduced.
If remediation of soil or groundwater is necessary, QTE will evaluate and propose the most cost-effective technology. Corrective Action Plans (CAPs) are then developed based on extensive experience and direct communication with regulatory agency staff (as applicable). QTE personnel have prepared CAPs utilizing various remedial methods including:
- Excavation and Disposal
- Air Sparging Systems– Process where pressurized air is injected into the ground, and the contaminated groundwater is then pumped out. This system can be used to clean up a variety of contaminants, including oil, gasoline, and other chemicals.
- Soil Vapor Extraction Systems- Can be used to remove a variety of contaminants, including volatile organic compounds (VOCs), petroleum products, and chlorinated solvents. In some cases, these systems can also be used to remove heavy metals from the soil.
- Bioventing- Process of using bacteria to clean up contaminated groundwater. It is a type of bioremediation that can be used to treat water that has been polluted with petroleum products, chemicals, or other contaminants.
- Groundwater Recovery Systems
- Bioremediation of both Soils and Groundwater- Process that uses living organisms to clean up contaminated soil and groundwater.
- Bioaugmentation of both Soils and Groundwater
- Natural Attenuation Monitoring
- Free-Phase Product Recovery Systems
- Metals Stabilization
Additional Consulting Services
Site development work can often require archaeological surveys to determine if the proposed development might impact cultural resources. Southern Illinois is rich with Native American artifacts and archeological sites that are protected by state and federal regulations. Damage to historical resources cannot be undone and can be costly.
QTE will assist our clients in complying with all applicable federal and state historic preservation regulations. Archaeological services offered by QTE include:
- Phase I Resource Identification Surveys
- Phase II Site Evaluations (National Register of Historic Places Eligibility)
- Phase III Data Recovery Investigations
- Construction Activity Monitoring
Section 404 of the Clean Water Act protects wetlands from unpermitted dredge and fill activities. QTE can assist our clients with wetlands delineations to determine if jurisdictional wetlands are present within a proposed development site. If jurisdictional wetlands are identified, QTE will assist with any required permitting and wetlands mitigation planning.
Environmental, archeological, and wetlands issues involve numerous agencies at the federal, state, and local level. Navigating through the regulations, agencies, and jurisdictions can be treacherous. Our firm has the knowledge, experience, and credentials to help you through the process of compliance.
To limit liabilities and avoid costly delays and regulatory penalties, contact us for more information.
The National Emission Standards for Hazardous Air Pollutants (NESHAPS) regulations, as well as certain State and local laws and ordinances, require the completion of asbestos surveys prior to the demolition or renovation of any commercial or public building. QTE is licensed to perform asbestos surveys in order to determine the presence of asbestos in suspect building materials and provide recommendations for asbestos remediation and disposal.
Residential Radon Testing
Long-term exposure to elevated concentrations of radon gas can cause lung cancer. QTE has performed hundreds of residential radon tests in the Metro East Illinois area for real estate transactions and concerned homeowners. QTE can assist our clients with radon testing to determine the indoor radon concentrations and evaluate the need for a radon mitigation system, or to determine if an existing radon mitigation system is working effectively. QTE does not perform radon mitigation work but can provide assistance to clients with mitigation contractors.
Septic System Evaluations
Local health departments are responsible for carrying out the Illinois State Code for Private Septic Systems. Septic system permits typically require soil information in order to determine what kind of septic system will work best with a particular type of soil conditions. Soil properties can vary from lot to lot. Certain soils are slowly permeable and require a larger filter bed area, while other soils may have a high seasonal water table that could periodically interfere with the common filter bed area. QTE has experienced personnel that can evaluate the on-site soil conditions in order to assist with the septic system design, location, and functionality.
Environmental Consulting Services
Let our highly qualified team assist you with these services:
- Phase I Environmental Site Assessments (ESAs)
- Phase II Environmental ESAs
- Subsurface Contaminant Exploration
- Site Characterization
- NEPA Surveys and Section 106 Consulting
- Design and Implementation of Corrective Action Plans
- Aquifer Testing
- Groundwater Monitoring and Modeling
- Well Design
- Underground Storage Tank (UST) Compliance
- UST Removal
- Regulatory Compliance
803 W State St, O’Fallon, IL 62269
(By appointment only.)
206 S. Linn Ave. Wentzville, MO 63385
Let QTE keep your project within specifications.
Quality Testing & Engineering, O'Fallon, IL / St. Louis, MO
Quality Testing & Engineering, with construction testing and engineering offices in O'Fallon, Illinois and Wentzville, Mo, serves the St Louis, Missouri metropolitan area as well as areas of Southern Illinois including O'Fallon, Illinois, Edwardsville, Illinois, Alton Illinois, Belleville, Illinois, Troy, Illinois, Columbia, Illinois, Scott Air Force Base, Illinois and other areas. We provide construction testing, environmental consulting and testing, geotechnical exploration, construction materials testing and other environmental services to the St Louis area, including Wentzville, Missouri, O'Fallon Missouri, St Louis County as well as all areas of Southern Illinois.
Quality Testing and Engineering products range in size from residential homes to Industrial/Refineries, heavy industrial projects such as power plants, refineries and factories. QTE works in commercial, educational, institutional, industrial, recreational, refinery, transportation and warehousing projects.